Lacing Tape sold by AEROTAPE


Flat Braided Teflon Coated Fiberglass Lacing Tape:

Western Filament Part #: LOF190GA

Fiberglass Lacing Tape braided with glass yarns individually coated with PTFE fluorocarbon MIL-Spec D finish prior to braiding. An additional coating must be specified if knot holding or fray resistance is required. Recommended for high temperature and hard vacuum/low outgassing applications.


(Formerly MIL-T-43435B Type IV)


Approximate operating temperature range is -100°F (-73°C) to 800°F (427°C).

Standard color: White. Black is also available upon request.

Suggested Coatings:
“X” Uncoated (Mil-Spec: A), “W” Wax (Mil-Spec: B), “S” Silicone (Mil-Spec: F), “G” Synthetic Elastomer (Mil-Spec: C), “A” Vinyl Chloride (Mil-Spec: E), “R” Synthetic Rubber (mil-Spec: C), “G/A” Vinyl Chloride over Synthetic Rubber.





Western Filament, Inc.

Request For Quote, Please Fill Out Form To The Left Under Product Photo:

A-A-52083 – Flat Braided Teflon Coated Fiberglass Lacing Tape:
 Additional Information


Nominal Tape Widths vs Actual Widths

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

  • 1" Nominal width = 15/16" (24mm) Actual width
  • 2" Nominal width = 1-7/8" (48mm) Actual width
  • 3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.





Back to the top