GC-SH7 Glass Cloth Tape (Adhesive Tape Products) – Aerotape

ATP GC-SH7 Glass Cloth Tape (Adhesive Tape Products)

GS-SH7 Glass Cloth Tape

A woven fiberglass, pressure sensitive tape designed for use in strategic masking off of areas for thermal spray/plasma spray operations. Can withstand exposure to temperatures up to and in excess of 500 degrees F. The high tensile strength and dimensional stability of the glass cloth backing are combined with a high quality silicone adhesive to produce a tape that is conformable, chemical and solvent resistant, and printable. Other applications: used for coil wrap, crossover insulation, and coil banding; used for insulation of electrical apparatus in military equipment; and used for sealing and bundling of non-electrical applications where flame retardency or high heat resistance is required. Can be qualified to meet MIL-19166C, Type 7

Typical Applications: Used in strategic masking of areas in thermal spray/plasma spray applications; insulation of electrical apparatus, for sealing and bundling of non-electrical applications where flame retardancy or high heat resistance is required; coil armor wrap.

 

Technical Data:

Adhesive Type: Silicone
Substrate: Glass Cloth - Natural (white)
Total Thickness: 7.6 mil
Adhesion to Steel: 35 oz/inch
Tensile Strength: 132 lb/inch
Dielectric Strength: 3.5 kV
Max. Operating Temperature: 500 Degrees F

 

 

Alternative: Alternative to: TLC #907; 3M #361; Ideal #7300; T&F 3807; Greenbelt #160-5S; Permacel #P212; and #IPG #RG-48; St. Gobain/Furon #2915-7 & #G-565 & #G561; Chemfab #340-TS; Taconic #6605-07D-NL; Lanmar #715-7; Bondtec #832TH; Ideal #IT-7300; Nitto #185; Scapa #C401; AFC #380-07S; Dewal #469.

 

GC-SH7 Tech Data Sheet

 

  

 

Adhesive Tape Products

Request For Quote, Please Fill Out Form To The Left Under Product Photo:

ATP GC-SH7 Glass Cloth Tape (Adhesive Tape Products)
 Additional Information

 

Nominal Tape Widths vs Actual Widths

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

  • 1" Nominal width = 15/16" (24mm) Actual width
  • 2" Nominal width = 1-7/8" (48mm) Actual width
  • 3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.

 

 

 

 

Back to the top