Menu
Cart 0

Intertape BT100-40 PMB ‘BLAST IMPACT’ TAPE

IPG BT100-40
PMB ‘BLAST IMPACT’ TAPE

Superior, Less costly, Replacement for 3M 500 Blast Tape

IPG BT100 Is A Durable rubber product engineered to meet requirements for protective masking of surfaces during dry paint stripping process.

Aggressive, acrylic, pressure-sensitive adhesive provides instant adhesion to clean/dry surfaces with little to no hot glue required on edges to prevent media intrusion..

Remains flexible and resists cracking and lifting.

IPG BT100 Conforms to irregular/curved surfaces.

For masking of surfaces PMB Blast Tape (dry strip paint removal) or other shot-peen processes (aerospace, industrial, automotive, etc.).  

Prevents small particles of blast media and other foreign debris from infiltrating and damaging sensitive surfaces, components and control systems. 

Intertape BT100 is Made in USA

 

BT100

Intertape Polymer Group

Request For Quote, Please Fill Out Form To The Left Under Product Photo:

Intertape BT100-40 PMB ‘BLAST IMPACT’ TAPE

Product Description

Durable rubber product engineered to meet requirements for protective masking of surfaces during dry paint stripping process. Aggressive, acrylic, pressure-sensitive adhesive provides instant adhesion to clean/dry surfaces with little to no hot glue required on edges to prevent media intrusion. Remains flexible and resists cracking and lifting. Conforms to irregular/curved surfaces. Uniform thickness allows maximum blast times.  Clean removal after blasting. White crepe release-coated paper liner allows BT100-40 to tear easily by hand.  Can also be cut by knife for precise fit. 

Product Applications:

For masking of surfaces PMB Blast Tape (dry strip paint removal) or other shot-peen processes (aerospace, industrial, automotive, etc.).  Prevents small particles of blast media and other foreign debris from infiltrating and damaging sensitive surfaces, components and control systems. 

Technical Information


  • Adhesive: High Tack / Acrylic
  • Thickness:  45 (1.14mm)
  • Tensile Strength: 5 (21.9 N/25mm) 
  • Service/Operating Temperature: up to 200°F
  • Elongation: 300%
  • Core: 3" diameter

Nominal Tape Widths vs Actual Widths

 

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

  • 1" Nominal width = 15/16" (24mm) Actual width
  • 2" Nominal width = 1-7/8" (48mm) Actual width
  • 3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.

 

 

Back to the top