Shurtape

Shurtape HP-500 Packaging Tape: Heavy Duty Grade

Price:
$12.45
+ Act Now... FREE Shipping Today!

Package Size: Roll

Roll

6 Pack

Case

Select Size: 3"

Color: Clear

Heavy duty grade packaging tape
Aggressive quick stick, bonding strength and holding power for a long-lasting, secure seal
Instant, permanent bond to a wide range of substrates and surfaces
Special release coating for consistent, low force unwind off the roll
Performs reliably to the core for efficient tape consumption
Certifications: ASTM D1974/D1974M-16; ASTM D 5486M-12, Type III; CID A-A-1684C; FDA Indirect Contact CFR 21, 175.105; FDA Indirect Contact CFR 21, 177.1520
Adhesive: Synthetic rubber/resin hot melt
Made in USA

Quantity

Shurtape HP-500

High-Performance Grade Packaging Tape

Shurtape HP-500 Heavy-Duty Grade Packaging Tape is a premium-grade biaxially oriented polypropylene film (BOPP) packaging tape. It features one strip sealing and is extremely tough for the most demanding manual or automatic packaging applications. It has a superior pressure sensitive rubber adhesive which offers excellent quick grab with aggressive holding power for dependable carton closure. Shurtape HP 500 is ideally suited for heavy, bulky, carton sealing in high stress applications and extreme handling conditions (recommended for overstuffed or under filled cartons and recouperage). Features include: aggressive quick stick, an instant permanent bond to a wide range of substrates and surfaces, special release coating for consistent, low force unwind off the roll and performs reliably to the core for efficient tape consumption. Used for packaging, bundling, repairing cartons, and for paper and film bags. Adheres well to corrugated cartons, paper, film and a variety of other substrates. Made in the U.S.

Case 2 inch x 36 rolls

Case 3 inch x 24 rolls

Technical Information

Shurtape HP500 High-Performance Grade Packaging Tape

Adhesive: synthetic rubber-resin
Carrier/Backing: 50 micron biaxially-oriented, cast polypropylene (BOPP) film
Thickness: 3 mils (carrier, adhesive)
Adhesion: 58 ounces per inch (to stainless steel test panel)
Adhesion to Backing: 6 ounces per inch
Tensile Strength: 42 pounds per inch (longitudinal) 58 pounds per inch (transverse)
Application Temperature: 35°F to 110°F
Service/Operating Temperature: 20°F to 150°F
Elongation: 150%
Holding Power to Fiberboard: 30,000+ minutes
Certifications: ASTM D 1974-98 (2003); ASTM D 5486M-12, Type III; CID A-A-1684C; FDA Indirect Contact CFR 21, 175.105; FDA Indirect Contact CFR 21, 177.1520
Core: 3" diameter

Nominal Tape Widths vs Actual Widths

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples: