Menu
Cart 0

Patco 5410 - Exterior Surface Protection

Patco 5410

Exterior Surface Protection

UV-stable LDPE film with rubber adhesive

UV and weather-resistant. Excellent low temperature adhesion. Chemical and abrasion resistant. Long-term preservation, sealing, and splicing applications. Direct protective mask on aircraft. Used in conjunction with outdoor shrink film for extended outdoor storage.

Specifications:

Description
Preservation & Sealing Tape 5410 White, 1/2" x 36Yd, 96 Per Case
Recommended Uses
  • Long term preservation, sealing, and splicing applications. Direct protective mask on aircraft, trucks, boats, and industrial equipment during outdoor storage. Can be used in conjuction with outdoor shrink film to secure and seal the shrink film border firmly during transportation or extended outdoor exposure.
Features & Benefits
  • U.V. and weather resistant. Highly conformable.
  • Clean removal.
  • Will not breakdown after extended outdoor exposure.
  • Adheres snugly to contoured and irregular surfaces.
  • Will not leave adhesive residue, stains, or ghosting on most surfaces.

 

Patco 5410 Tech Data Sheet

Patco 5410 Safety Sheet 

Patco 5410 Technical Data:

Patco

Request For Quote, Please Fill Out Form To The Left Under Product Photo:

Patco 5410 - Exterior Surface Protection
Adhesive Rubber
Backing/Carrier Polyethylene
Color White
Features Heavy duty PE backing. UV and weather resistant. Highly conformable. Non-staining, clean removal, rubber based adhesive. Excellent shrink properties.
Applications Long term preservation, sealing, and splicing applications. Direct protective mask on aircraft, trucks, boats, and industrial equipment during outdoor storage. Can be used in conjunction with outdoor shrink film to secure and seal the shrink film border firmly during transportation or extended outdoor exposure.
Construction Single Coated
Market Aerospace
Brand Patco

Thicknes 9.0mils 0.229mm ASTM D-1000
Adhesion to Steel 34oz/in 3.72g/mm PSTC-1
Tensile 17lb/in 29.77kg/mm ASTM D-1000
Elongation 500%
Operating Temperature -40 – +200ºF -40 – +93ºC

 

 

 

Additional Information

 

Nominal Tape Widths vs Actual Widths

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

  • 1" Nominal width = 15/16" (24mm) Actual width
  • 2" Nominal width = 1-7/8" (48mm) Actual width
  • 3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.

 

 

 

 

Back to the top