Patco 5410
Exterior Surface Protection
UV-stable LDPE film with rubber adhesive
UV and weather-resistant. Excellent low temperature adhesion. Chemical and abrasion resistant. Long-term preservation, sealing, and splicing applications. Direct protective mask on aircraft. Used in conjunction with outdoor shrink film for extended outdoor storage.
Specifications:
Description
Preservation & Sealing Tape 5410 White, 1/2" x 36Yd, 96 Per Case
Recommended Uses
Preservation & Sealing Tape 5410 White, 1/2" x 36Yd, 96 Per Case
Recommended Uses
- Long term preservation, sealing, and splicing applications. Direct protective mask on aircraft, trucks, boats, and industrial equipment during outdoor storage. Can be used in conjuction with outdoor shrink film to secure and seal the shrink film border firmly during transportation or extended outdoor exposure.
- U.V. and weather resistant. Highly conformable.
- Clean removal.
- Will not breakdown after extended outdoor exposure.
- Adheres snugly to contoured and irregular surfaces.
- Will not leave adhesive residue, stains, or ghosting on most surfaces.
Patco 5410 Tech Data Sheet
Patco 5410 Safety Sheet
Patco 5410 Technical Data:
|
Patco Request For Quote, Please Fill Out Form To The Left Under Product Photo: |
| Adhesive | Rubber |
| Backing/Carrier | Polyethylene |
| Color | White |
| Features | Heavy duty PE backing. UV and weather resistant. Highly conformable. Non-staining, clean removal, rubber based adhesive. Excellent shrink properties. |
| Applications | Long term preservation, sealing, and splicing applications. Direct protective mask on aircraft, trucks, boats, and industrial equipment during outdoor storage. Can be used in conjunction with outdoor shrink film to secure and seal the shrink film border firmly during transportation or extended outdoor exposure. |
| Construction | Single Coated |
| Market | Aerospace |
| Brand | Patco |
| Thicknes | 9.0mils | 0.229mm | ASTM D-1000 |
| Adhesion to Steel | 34oz/in | 3.72g/mm | PSTC-1 |
| Tensile | 17lb/in | 29.77kg/mm | ASTM D-1000 |
| Elongation | 500% | ||
| Operating Temperature | -40 – +200ºF | -40 – +93ºC |
|
Additional Information
|
Nominal Tape Widths vs Actual Widths
Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:
- 1" Nominal width = 15/16" (24mm) Actual width
- 2" Nominal width = 1-7/8" (48mm) Actual width
- 3" Nominal width = 2-13/16" (72mm) Actual width
Note that tape rolls are NOT guaranteed to be splice-free.