SHARPLINE 200

Is a 5 mil latex saturated paper used for die-cut or hand-cut spray mask stencils and masking of surfaces to be painted. Used for sign lettering, auto pinstriping, and aircraft stenciling where paint is used instead of decals. Adhesive is formulated to withstand temperatures of 200 degrees F. to 300 degrees F. for short periods of time. The product is designed to prevent paint from bleeding through and allows for a clean sharp edge. A liner allows product to be die-cut if desired. Can be adapted for computerized stencil machines.

This product is not intended for fly-away applications.

DO NOT USE ON COPPER, BRASS, OR ANODIZED ALUMINUM.
OUTDOOR EXPOSURE IS NOT RECOMMENDED WITHOUT PRIOR TESTING

Quantity

Technical Data:

Typical Properties - Backing:

Basis wt., lbs/3000 sq. ft. 42-49
Thickness, mils 4-5
Tensile strength, lbs/inch M.D. 12.7 min
Elongation, % M.D. 6.0 min
Elmendorf tear, grams, M.D. 56 min
C.D. 56 min

Typical Properties - Adhesive:

Base Natural latex
Adhesion to steel, oz/inch width 24-30 (At time of manufacture)
PSTC-1 (Modified)

Typical Properties - Liner:

flatback

Sharpline 200 Tech Data Sheet

Additional Information

Nominal Tape Widths vs Actual Widths

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples: