Patco D9200 - Transparent Flame Retardant Aircraft Waterseal Tape – Aerotape

D9200 TDS Sold By AEROTAPE

Patco D9200 

Transparent Flame Retardant  Aircraft Waterseal Tape



Recommended Uses
  • Aircraft waterseal applications in main cabin wet areas (galleys, lavatories, entryways).
  • Wide width availability allows for sealing large areas.
  • Reinforce and provide moisture barrier for aircraft insulation fastener opening.

 

Patco D9200-50 Linered, Flame Retardant, Clear Polyurethane Moisture Barrier Tape Meets:

  • FAR 25.853(a)
  • Fokker Fk05-193

Stock Status:  Non-stock.  Minimum of two (2) weeks for us to receive new rolls from Patco  (this tape is not readily available from Patco; it is normally a “made-to-order” tape)

Shelf Life:  Twenty-four (24) months from DOM


Features & Benefits
  • Flame retardant, very tough, elastic, water resistant, and transparent.
  • Meets vertical burn specs.
  • Holds up under heavy use.
  • Excellent moisture barrier.
  • Allows visual inspection.
  • Repositional and permanent.
  • Ease of installation.
  • Stays bonded.
  • Extra thickness for stay-flat and stability.
  • Excellent for die-cut pieces.
  • Highly visible.
  • Tougher than paper.
  • Speeds removal, & no tearing during application.

Thickness (mils) : 14
Elongation (%) : 340
Adhesion (oz/in) : 80
Adhesive Type : Polyurethane
Tensile (lb/in) : 90
Vendor Resource Number : D9200C4M51RD
Color : Clear
Width : 4 Inch
Length : 36 Yard

 

D9200 Tech Data Sheet

 

 

 

 

Patco

Request For Quote, Please Fill Out Form To The Left Under Product Photo:

Patco D9200 - Transparent Flame Retardant Aircraft Waterseal Tape
Additional Information

 

Nominal Tape Widths vs Actual Widths

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

  • 1" Nominal width = 15/16" (24mm) Actual width
  • 2" Nominal width = 1-7/8" (48mm) Actual width
  • 3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.

 

 

 

 

Back to the top