Polyken 36H Double-Coated Mounting Tape

Polyken 36H


PET Film with Aggressive Acrylic Adhesive on both sides.  Polyken 36H is ideal for a variety of mounting and bonding applications. Specifically designed for the Aerospace industry, 36H can be used to mount kick plates, trim pieces, signs, and placards throughout an aircraft interior. 36H is also suitable for interior mounting applications in RVs, boats, and more.

High tack adhesive bonds to a variety of surfaces • Superior hanging strength for long term bond • Easy to remove release liner • Performs over a wide temperature range • Withstands moisture and humidity • Superior aging characteristics • Ideal for bonding plastics (polyethylene, polystyrene, polypropylene, TPO, and ABS) as well as foams (EPDM, ether, esther, and polyurethane)


Boeing – BMS 5-173 Type 1, Class 1, Grade A

Technical Data:


Request For Quote, Please Fill Out Form To The Left Under Product Photo:

Polyken 36H Double-Coated Mounting Tape
Adhesion to Steel- Air Side 88oz/in 959N/m PSTC-133
Adhesion to Steel- Liner Side 93oz/in 1014N/m PSTC-133
Adhesive Thickness (air side) 1.9mils 48microns PSTC-133
Adhesive Thickness (liner side) 1.9mils 48microns PSTC-133
Application Temperature Range 50 to 150ºF 10 to 65ºC
Carrier Thickness 0.5mils 13microns PSTC-133
Intermittent Temperature 250ºF 121ºC
Shear Strength 24Hours PSTC-107


Polyken 36H Tech Data Sheet





Additional Information


Nominal Tape Widths vs Actual Widths

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

  • 1" Nominal width = 15/16" (24mm) Actual width
  • 2" Nominal width = 1-7/8" (48mm) Actual width
  • 3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.





Back to the top