E&H # 770-3FRD Pressure Sensitive Insulation Cover Splicing Tape

E&H # 770-3FRD

Tedlar Insulation Blanket Splicing Tape (METALIZED)

Pressure Sensitive Insulation Cover Splicing Tape

is primarily used in the fabrication of insulation blanket covers and for the installation of insulation blankets. It may be used for sealing sewn seams and for closing fabrication slits or holes around brackets, conduits or other objects that may exist after installation.

Compatible with Orcon OT-16A

E&H Laminating brand #770-3FRD Dull Gray Polyvinyl Fluoride Insulation Cover Splicing Tape; meets:

  • DMS 1984 Rev. P Type 6 Class 2
  • Documentation:  Factory C of C to DMS 1984 and Burn Test Cert


Lead Time:  The factory has new rolls in stock and can ship to us the same day that we send them our purchase order.  We will typically receive the shipment four calendar days later.



15 Min                       54.4 oz/inch average
3 Day                        129.6 oz/inch average
30 Day                      152.3 oz/inch average
ENGLIGH                                       METRIC
        23.6 lbs. / 1" width average             105.02N / 25mm average
WEIGHT: 4.5 +/- .3oz/square yard

Burn Length              3.4 inches maximum
Flame Time               0 Seconds
Drip Flame Time        No Drips
SHELF LIFE: Minimum of 12 months in cool, dry storage

DMS-1984 Rev. P Type 6 Class 2
FAA Radiant heat Panel FAR 25.856 (A)
FAR PART 25.853 (A,B)
DMS-1511 12 second vertical burn
BSS-7230 12 second vertical burn


770-3FRD Tech Data Sheet






Request For Quote, Please Fill Out Form To The Left Under Product Photo:

E&H # 770-3FRD Pressure Sensitive Insulation Cover Splicing Tape
Additional Information


Nominal Tape Widths vs Actual Widths

Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:

  • 1" Nominal width = 15/16" (24mm) Actual width
  • 2" Nominal width = 1-7/8" (48mm) Actual width
  • 3" Nominal width = 2-13/16" (72mm) Actual width

Note that tape rolls are NOT guaranteed to be splice-free.





Back to the top