A beige, high temperature, fine crepe paper masking tape with a pressure-sensitive natural rubber adhesive. Designed for clean removal
from a variety of surfaces after exposure to oven temperatures up to 325° (163°C)
for 30 minutes (times and temperatures determined by surface). Performs well in wet strip applications. Its easy handling, smooth crepe backing exhibits high strength, excellent conformability to irregular surfaces and exceptional cornering. Provides resistance to paint flaking and a clean, well defined
Automotive, truck, bus and marine paint masking. Recommend hot to warm removal, although can be removed cold.
The following data are nominal values based on PSTC, ASTM and other standard tests. The data should not be considered as specifications.
Backing Fine Crepe Paper
Adhesive Natural Rubber
Adhesion to Steel (oz/in of width) 29 (7.9 N/25mm)
Tensile Strength (lbs/in of width) 26 (114 N/25mm)
Elongation (% at break) 10
Total Thickness (mils) 7.2 (0.183mm)
Quick Stick (oz/in of width)
To Kraft 8 (2.2 N/25mm)
To Steel 17 (4.6 N/25mm)
Nominal Tape Widths vs Actual Widths
Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples:
- 1" Nominal width = 15/16" (24mm) Actual width
- 2" Nominal width = 1-7/8" (48mm) Actual width
- 3" Nominal width = 2-13/16" (72mm) Actual width
Note that tape rolls are NOT guaranteed to be splice-free.
We Also Recommend
E&H # 770-3FRD Pressure Sensitive Insulation Cover Splicing Tape
Patco D9100SW: Flame Retardant Aircraft Waterseal Tape
Intertape FM35 High Temperature Fineline Masking Tape - Intertape Polymer Group